Zhong Ming

Formwork, Scaffolding & ACP Manufacturer And Exporter in China For More Than 20 Years

Email Support sales1@cn-zhongming.com sales6@cn-zhongming.com
Call Support +86 158 6737 8966 +86 183 9586 8099

Formwork

Concrete mould Wall Slab Plastic formwork for concrete pouring

ABS PLASTIC FORMWORK ADVANTAGES: LIGHT Lighter panels are safer, easier to use and more productive. It is a fact that repeated lifting of heavy equipment causes fatigue and injury. Zhongming plastic formwork weighs on average 17 kg/m2 with no single element heavier than 13 kg: this means that the whole system can always be used by hand, in any situation. Crane operation is not a must anymore, giving construction sites much greater flexibility without any compromise on health and sa...

inquiry detail
63.5#steel formwork adustable column formwork & wall formwork

1.Product Introduction： Luowen new 63.5 Steel Frame Formwork System is mainly made up of steel frame, plywood panel,scaffold bracket,coupler,compensation waler,tie rod,lifting hook , steel clamp and pull-push prop, etc. The column formwork can be assembled in advance on the ground or avoid complex construction sites. Use the equipment to place it on the construction site and pour the column concrete. When the formwork is removed after the maintenance, it is not necessary to completely disas...

inquiry detail
63#steel formwork

1.Product Introduction The full name of 63 Steel Frame Formwork System is 63 Steel Frame Plywood Build-up Formwork System, its stiffness is high and the surface is smooth, could be braced and dismantle wholly or separately 2.Product Details Product name steel formwork 0. Application Construction concrete pouring mould 1.Thickness 63mm Plywood panel 12mm 2.weight 30kg/m2. 3.Surface treatment paint spraying 4.reused about 50 times 5.Lateral pressure 30-40 KN/m2. 6.Model N...

inquiry detail
120#steel formwork

Product Introduction Luowen 120 Steel Frame Formwork System is mainly made up of steel frame, plywood panel,scaffold bracket,coupler,compensation waler,tie rod,lifting hookformwork, steel clamp and pull-push prop, etc 1. The steel frame formwork is 18mm thickness plywood covered with hollow steel. 2. The frame is highly strengthened, and the wall formwork can bear lateral pressure 60KN/m2 while the column formwork can bear 80 KN/m2. 3. As a standardized system, it is flexible to assemble, woo...

inquiry detail
H20 Timber beam wall formwork

H20 timber beam formwork

inquiry detail
H20 timber beam column formwork

Timber beam formwork for column construction

inquiry detail
H Beam System

Timber Beam Formwork Flat formwork is made up of plywood,timber beam and steel walingng. Fix plywood with timber beams by tapping screws connect timber beam with steel waling by flange clamp it is easy to assemble, disassemble and adjust in site. It is light in weight and convenient for construction and transportation. The construction is also very friendly to environment. The plywood has perfect performance. The plywood has good air permeability and water abso...

inquiry detail
Formwork clamp

Formwork accessory: formwork clamp Application: for construction formwork joint

inquiry detail
Formwork clamp

Formwork accessory: Formwork clamps

inquiry detail
Swivel nut for formwork

Formwork accessory: swivel nut Application: used with tie rods for concrete formwork

inquiry detail
Formwork hook

Steel formwork accessory: formworkhook Application picture:

inquiry detail
H20 Timber Beam

H20 timber beam( multilayer plywood of web and with plastic head) Luowen H20 Timber Beam is of light weight, high tenacity, excellent in waterproof, acid-proof, alkali-proof, good straightness. Characteristics: 1、 Light Weight: the density of H20 Timber Beam is only 4.5kg per meter, it is easy to deliver、dismantle and install. 2、 High Tenacity: The H20 Timber Beam is not easy to break off because of fiber. 3、 Good Proofing: The H20 Timber Beam is good at waterproofing, acidproofing, alka...

inquiry detail

1 2 Next > >> Page 1 / 2